Step 2: Setting Up The Base Phone; Choose The Dialing Mode - Sony SPP-SS966 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Step 2: Setting up the base phone (continued)
Notes
• Use only the supplied AC-T46 AC power adaptor.
Do not use any other AC power adaptor.
• Connect the AC power adaptor to a continuous power
supply.
• Place the base phone close to the AC outlet so that
you can unplug the AC power adaptor easily.
Tips
• If your telephone outlet isn't modular, contact your
telephone service company for assistance.
• To remove the wall bracket, press in the upper tab.

Choose the dialing mode

For the telephone to work properly, select an appropriate dialing mode
(tone or pulse).
Depending on your dialing system, set the DIAL MODE switch as
follows:
If your dialing system is
Tone
Pulse
If you aren't sure of your dialing system
Make a trial call with the DIAL MODE switch set to T.
If the call connects, leave the switch as is; otherwise, set to P.
10
US
Getting Started
DIAL MODE switch
Polarity of the plug
Set the switch to
T
P
+
Modular

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido