Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Cordless Telephone
Operating Instructions
Manual de instrucciones (verso)
Owner's Record
The model and the serial numbers are located at the bottom
of the unit. Record the serial number in the space provided
below. Refer to these numbers whenever you call upon your
Sony dealer regarding this product.
Model No. SPP-N1003 Serial No.
SPP-N1003
Sony Corporation © 2000 Printed in China
For the customers in the USA
Be sure to save the receipt and attach it to your WARRANTY card when having your
equipment repaired at an authorized Sony service station.
For the customers in the USA
3-048-610-11 (1)
IMPORTANT SAFETY
INSTRUCTIONS
When using your telephone equipment, basic safety precautions should
always be followed to reduce the risk of fire, electric shock and injury to
persons, including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
4. Do not use this product near water, for example, near a bath tub, wash
bowl, kitchen sink, or laundry tub, in a wet basement, or near a
swimming pool.
5. Do not place this product on an unstable cart, stand, or table. The
product may fall, causing serious damage to the product.
6. Slots and openings in the cabinet and the back or bottom are provided
for ventilation. To protect it from overheating, these openings must not
be blocked or covered. The openings should never be blocked by
placing the product on the bed, sofa, rug, or other similar surface. This
product should never be placed near or over a radiator or heat register.
This product should not be placed in a built-in installation unless proper
ventilation is provided.
7. This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power
supply to your home, consult your dealer or local power company.
8. Do not allow anything to rest on the power cord. Do not locate this
product where the cord will be abused by persons walking on it.
9. Do not overload wall outlets and extension cords as this can result in the
risk of fire or electric shock.
10. Never push objects of any kind into this product through cabinet slots
as they may touch dangerous voltage points or short out parts that could
result in a risk of fire or electric shock. Never spill liquid of any kind on
the product.
11. To reduce the risk of electric shock, do not disassemble this product, but
take it to a qualified service personnel when some service or repair work
is required. Opening or removing covers may expose you to dangerous
voltages or other risks. Incorrect reassembly can cause electric shock
when the appliance is subsequently used.
12. Unplug this product from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the product.
C. If the product has been exposed to rain or water.
D. If the product does not operate normally by following the operation
E. If the product has been dropped or the cabinet has been damaged.
F. If the product exhibits a distinct change in performance.
13. Avoid using a telephone (other than a cordless type) during an electrical
storm. There may be a remote risk of electric shock from lightning.
14. Do not use the telephone to report a gas leak in the vicinity of the leak.
SAVE THESE
INSTRUCTIONS
CAUTION:
To reduce the risk of fire or injury to persons by battery, read and follow
these instructions.
1. Use only the following type and size battery pack: Sony BP-T50.
2. Do not dispose of the battery pack in a fire. The cell may explode.
Check with local codes for possible special disposal instructions.
3. Do not open or mutilate the battery pack. Released electrolyte is
corrosive and may cause damage to the eyes or skin. It may be toxic if
swallowed.
4. Exercise care in handling battery in order not to short the battery with
conducting materials such as rings, bracelets, and keys. The battery or
conductor may overheat and cause burns.
5. Charge the battery pack provided with or identified for use with this
product only in accordance with the instructions and limitations
specified in the instruction manual provided for this product.
6. Observe proper polarity orientation between the battery pack and
battery charger.
INFORMATION FOR
GENERAL TELEPHONES
1. This equipment complies with Part 68 of the FCC rules. On the bottom
of this equipment is a label that contains, among other information, the
FCC registration number and ringer equivalence number (REN) for this
equipment. If requested, this information must be provided to the
telephone company.
2. The applicable registration jack (connector) USOC-RJ11C is used for
this equipment.
instructions. Adjust only those controls that are covered by the
operating instructions because improper adjustment of other
controls may result in damage and will often require extensive work
by a qualified technician to restore the product to normal operation.

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Sony SPP-N1003

  • Página 1 To reduce the risk of fire or injury to persons by battery, read and follow these instructions. 1. Use only the following type and size battery pack: Sony BP-T50. 2. Do not dispose of the battery pack in a fire. The cell may explode.
  • Página 2: Setting Up The Phone

    Slide open the battery compartment lid of the handset. uninterrupted service. 7. If trouble is experienced with this equipment (SPP-N1003), for repair or Connect the battery connector with correct polarity (black wire goes on warranty information, please contact Sony Direct Response Center: Tel lower side and red wire goes on upper side), and hook the cords.
  • Página 3: Making And Receiving Calls

    Making and receiving calls Speed dialing Making calls You can dial with a touch of a few keys by storing a phone number on a dialing key. Storing phone numbers Pick up the handset from the Press (PGM). base unit. The TALK/BATT LOW lamp Press (TALK), and wait until flashes.
  • Página 4: Making And Receiving Calls Using The Headset

    • If the charge terminals of the base unit and handset are soiled, wipe them with a soft cloth. If you have any questions or problems concerning your phone, please consult your nearest Sony dealer. Precaution Avoid listening your headset at so loud a volume that extended play might affect your hearing.
  • Página 5: Troubleshooting

    Troubleshooting Should any problem persist after you have made these checks, consult your nearest authorized Sony dealer. Symptom Remedy The handset does not make • Reset the digital security code. or receive a call. • Place the base unit away from noise sources such as TV, FM radio or PC.
  • Página 6: Registro Del Propietario

    Guarde el recibo y únalo a su tarjeta de GARANTÍA para el caso de tener que llevar 1. Sólo debe utilizar un paquete de pilas del siguiente tipo y tamaño: Sony su equipo a reparar a un centro de reparaciones autorizado por Sony.
  • Página 7: Configuración Del Teléfono

    útil de la misma habrá expirado, y habrá que reemplazarla. Póngase en base no debe colocarse cerca o sobre estos aparatos. En caso de interferencias, basta contacto con su proveedor o con un centro de reparaciones autorizado por Sony, y con alejar el teléfono inalámbrico para reducir o eliminar este efecto.
  • Página 8: Realización Y Recepción De Llamadas

    Para borrar el último número de teléfono marcado Realización y recepción de Presione dos veces (REDIAL/PAUSE). llamadas El número se borrará de la memoria, y usted oirá un pitido largo de confirmación. Realización de llamadas Marcación abreviada Tome el microteléfono de la Usted podrá...
  • Página 9: Montaje De La Unidad Base En Una Pared

    • Si se ensucian los terminales de carga de la unidad base y del microteléfono, (HEADSET) límpielos con un paño. En caso de cualquier duda o problema con el teléfono, póngase en contacto con el proveedor Sony más próximo. Notas sobre las fuentes de 3, 4 alimentación Batería...
  • Página 10: Solución De Problemas

    Solución de problemas Si el problema persiste después de haber realizado estas comprobaciones, consulte a su proveedor Sony. Síntoma Solución No es posible realizar ni • Reponga el código digital de seguridad. recibir llamadas. • Coloque la unidad base alejada de fuentes de ruido, como un televisor, un aparato de radio de FM, o un PC.

Tabla de contenido