Changing the dust bag
Seal the dust bag by pulling the sealing strip and then
remove it.
Slide the new dust bag into the holder to the stop.
Caution: The lid can only be closed when a dust
bag has been inserted.
Cleaning the motor protection filter
The motor protection filter should be cleaned at
regular intervals by tapping it or washing it out.
Open the dust compartment cover.
Remove the motor protection filter in the direction of
the arrow.
Empty the motor protection filter by tapping it.
If the motor protection filter is very dirty, wash it out.
Leave the filter to dry for at least 24 hours.
After cleaning, insert the motor protection filter in the
machine and close the dust compartment cover.
en
13