Preparations; Connecting Speakers - Yamaha CRX-B370 Manual De Instrucciones

Preparations

Connect speakers, the antenna, etc. and turn the unit on.
Do not connect the power cord of the unit until you have finished connecting all cables.

Connecting speakers

1
Remove the insulation from the ends
of the speaker cables to expose the
bare wires.
15 mm (5/8 in.)
2
Connect speakers to the unit, as the
illustration shows.
• Prepare speakers, subwoofer and speaker cables
separately.
• See documentation provided with the speakers
for more information.
Right speaker
Speaker cable
Caution
• If the bare speaker wires touch each other or any metal part of the unit, it could damage the unit and/or the speakers.
• Use speakers of at least 6 Ω impedance.
Note
• Make sure that left and right (L, R) connections and polarity (red: +, black: -) are correct. If connections are incorrect, the sound will
be unnatural.
• You can also connect a subwoofer to the unit (it must have a built-in amplifier).
Left speaker
1
3
Monaural pin cable
2
Subwoofer
13
En