Basic Menu - Yamaha RX-SL100RDS Manual De Instrucciones

SET MENU
You can use the following parameters to adjust a variety of system settings and customize the way this unit operates.
Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment.

BASIC menu

Use to quickly setup basic system parameters (see page 16).
SOUND menu
Use to manually adjust any speaker setting.
y
Most of the parameters described in the SOUND menu are set automatically when you perform the BASIC settings (see page 16).
Item
Center SP. GEQ
SP Tone Control
HP Tone Control
Speaker Set
SP Distance
LFE Level
Dynamic Range
INPUT menu
Use to reassign digital input/outputs or select the input mode.
Item
Input Assign
Input Mode
OPTION menu
Use to adjust the optional system settings.
Item
Display Dimmer
Memory Guard
Audio Mute
TUNER Freq/Step
Standby SCART
*a
: TUNER Freq/Step is only available for Asia and General models.
*b
: Standby SCART is only available for the Europe model.
38
SET MENU
Adjusts the frequency.
Adjusts the tonal balance of the speakers.
Adjusts the tonal balance of the headphones.
Selects the output mode suitable for each speaker, the speakers for low-frequency signal output,
and the cross over frequency.
Adjusts the delay time of each speaker.
Adjusts the output level of the LFE channel for Dolby Digital or DTS signals.
Adjusts the dynamic range for Dolby Digital or DTS signals.
Assigns jacks according to the component to be used.
Selects the initial input mode of the source.
Adjusts the overall brightness of the front panel display.
Locks sound field program parameters and other SET MENU settings.
Adjusts the muting level for audio sources.
*a
Switches frequency spacing.
Turns on this unit when a component connected using a SCART cable is turned on.
Features
Features
Features
Page
40
40
40
41
42
42
42
Page
43
44
Page
45
45
45
45
*b 45