Yamaha RX-SL100RDS Manual De Instrucciones página 47

Display Dimmer (Display dimmer)
OPTION menu > Display Dimmer >
Display Dimmer
Memory Guard
Audio Mute
DIMMER (Dimmer)
Use to adjust the brightness of the front panel display.
Choices: –4 to 0
Memory Guard (Memory guard)
Use this feature to prevent accidental changes to DSP
program parameter values and other system settings.
OPTION menu > Memory Guard
Display Dimmer
Memory Guard
Audio Mute
TUNER Freq/Step
Choices: OFF, ON
Select ON to protect:
• DSP program parameters
• All SET MENU items
• All speaker levels
When Memory Guard is set to ON, you cannot use the test
tone or select any other SET MENU items.
Audio Mute (Mute)
Use this feature to adjust how much the mute function
reduces the output volume.
OPTION menu > Audio Mute
Display Dimmer
Memory Guard
Audio Mute
TUNER Freq/Step
Standby SCART
Choices: –20 dB, –50 dB, –m dB
• Select –20 dB to reduce the current volume by 20 dB.
• Select –50 dB to reduce the current volume by 50 dB.
• Select –m dB to completely halt all output of sound.
0
OFF
ON
–20 dB
–50 dB
∞
– dB
TUNER Freq/Step (Tuner frequency step)
Use this feature to adjust the frequency spacing for the
tuner. The new setting becomes active the next time the
power is turned on.
OPTION menu > TUNER Freq/Step
Memory Guard
Audio Mute
TUNER Freq/Step
Standby SCART
Choices: AM: 9kHz, FM: 50kHz and AM: 10kHz,
FM: 100kHz
• Select AM: 9kHz, FM: 50kHz to set the AM band to
9kHz and the FM band to 50kHz.
• Select AM: 10kHz, FM: 100kHz to set the AM band to
10kHz and the FM band to 100kHz.
Note
This feature is only available when using Asia and General
models.
Standby SCART (Standby SCART)
Use this feature to select whether you want signals carried
via SCART connections to pass through this unit when it
is set to the standby mode.
OPTION menu > Standby SCART
Audio Mute
TUNER Freq/Step
Standby SCART
Choices: ON, OFF
• Select ON if you want to allow signals to pass through
this unit when it is in standby mode. (For example, if
this unit is connected via its SCART connectors
between your TV and VCR, the TV signals can pass
through to the VCR even when this unit is in the
standby mode.)
• Select OFF if you do not want signals to pass through
this unit when it is in standby mode.
SET MENU
AM:9kHz, FM:50kHz
AM:10kHz, FM:100kHz
ON
OFF
45