Input Menu - Yamaha RX-SL100RDS Manual De Instrucciones

INPUT menu

Use this menu to manually adjust any input setting.
1
Press AMP to select the AMP mode, then
press SET MENU.
AMP
then
2
Press k/n repeatedly to select INPUT menu,
then press h.
BASIC menu
SOUND menu
INPUT menu
3
Select the desired parameters, then press
ENTER to access and adjust.
MENU
SET MENU
Input Assign
Input Mode
Input Assign (Input assignment)
You can assign how this unit's DIGITAL INPUT jacks
correspond to the component to be used if this unit's initial
settings do not meet your needs. Change the following
parameters to reassign the respective jacks and effectively
connect more components.
Once the inputs have been reassigned, you can select the
corresponding component by using INPUT menu and
VOLUME/SELECT on the front panel (or the input
selector buttons on the remote control).
INPUT menu > Input Assign >
Input Assign
Input Mode
OPTICAL INPUT 1
Choices: VCR, VIDEO1, DTV/CBL, DVD/CD
OPTICAL INPUT 2
Choices: VCR, VIDEO1, DTV/CBL, DVD/CD
COAXIAL INPUT 3
Choices: VCR, VIDEO1, DTV/CBL, DVD/CD
Note
You cannot select a specific item more than once for the same
jack.
SET MENU
OPTICAL INPUT 1
OPTICAL INPUT 2
COAXIAL INPUT 3
43