Using The Blender; Cleaning And Servicing - Bosch MUZ8MX2 Instrucciones De Uso

Ocultar thumbs Ver también para MUZ8MX2:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 39
en

Using the blender

Note: The blender jug consists of extremely
temperature-resistant borosilicate glass
and allows you to prepare even boiling hot
ingredients without the glass cracking.
Risk of burns!
Risk of scalding!
Caution when processing hot liquids.
If processing hot liquids, steam escapes
through the funnel in the lid.
Add a max. 0.75 litres of hot or frothing
liquid.
Important information
In these instructions for use the recom-
mended reference values for the operating
speed refer to appliances with a 7-setting
rotary switch.
For appliances with a 4-step rotary
switch the guide values can be found
in the following table:
7 settings: 1...2...3...4...5...6...7
4 settings: 1........2........3........4
Fig. 
Press release button and move
multi-function arm to position 5.
Cover unused drives with drive
covers.
Remove the blender drive cover.
Attach blender jug (mark on the handle
on mark on the base unit) and turn
all the way in an anti-clockwise direction.
Add ingredients.
Maximum amount of liquid
ingredients = 1.75 litres;
Maximum amount of frothing
or hot liquids = 0.75 litres;
Optimum processing amount
of solid ingredients = 100 grams.
Attach the cover and turn anti-clockwise
all the way into the blender handle.
The cover must be locked in position.
Set the rotary switch to the desired
setting.
8
Adding more ingredients (Fig.
Switch off the appliance with the rotary
switch.
Remove the lid and add ingredients
or
remove the funnel and gradually add
solid ingredients through the refill
opening
or
pour liquid ingredients through the funnel.
Important information
When processing liquids/liquid ingre-
dients, slowly increase the speed of the
appliance in stages to prevent the food
from shooting out.
After using the appliance
Switch off the appliance with the rotary
switch. Wait until the blade has come
to a standstill.
Remove mains plug.
Rotate the blender in a clockwise direc-
tion and remove.
Take the lid off the blender jug.
Rotate the lid in an anti-clockwise
direction and remove.
Tip: It is recommended to clean the blender
immediately after use.

Cleaning and servicing

Risk of injury from sharp blades!
Do not touch blender blades with bare
hands. Clean them with a brush.
Warning!
Do not wash blender holder in the dish-
washer or leave it in water.
Clean blender holder under running
water.
Lid, funnel and blender jug can
be washed in the dishwasher.
Robert Bosch Hausgeräte GmbH
-8)

Publicidad

Tabla de contenido
loading

Tabla de contenido