Technical Data - Husqvarna MS 360 G Manual De Instrucciones

Technical data

Engine
Engine
Power, Hp/kW
(see note 1)
Speed, rpm
Oil tank capacity, US pint/litre
Fuel tank capacity, gallon / l
Water cooling
Water pump Qmax, g/h / l/h
Water tank capacity, gal/l
Cutting equipment
Max spindle speed, rpm
Blade size - max, inch/mm
Cutting depth - max, inch/mm
Cutting length – max, inch/mm
Arbor size, inch/mm
Dimensions
Weight, lb/kg
Size (LxWxH), inch/mm
For further information and questions about this specific engine please see, www.engines.honda.com.
Note 1: As specified by engine manufacturer. The power rating of the engines indicated is the average net power output
(at specified rpm) of a typical production engine for the engine model measured to SAE J1349. Mass production engines
may differ from this value. Actual power output for the engine installed in the final machine will depend on the operating
speed, environmental conditions and other variables.
TECHNICAL DATA
MS 360 G
Honda GX160
4.8/3,6
3900
0,6/0,58
0,8/3,1
300/1140
5,7/26
3100
14/355
5/127
15/380
1/25,4
170/77
44,1x25,2x36,9 / 1120x639x938
English – 21