Symbols On The Product; Type Plate; Product Liability - Husqvarna MS 610 G Manual Del Usuario

Symbols on the product

WARNING! The product can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious or fatal
injury to the operator or others.
Please read the operator's manual carefully
and make sure you understand the
instructions before using the product.
Always wear:
• Hearing protection
• Protective goggles or a visor
• Breathing mask.
WARNING! Keep your hands and feet away
from the blade.
WARNING! The guards should always be
fitted on the product.
WARNING! Dust forms when cutting, this
can cause injuries if inhaled. Use an
approved breathing mask. Avoid inhaling
exhaust fumes. Always provide for good
ventilation.
WARNING! Sparks from the cutting blade
can cause fire in combustible materials such
as: petrol (gas), wood, clothes, dry grass
etc.
WARNING! Ensure the blades are not
cracked or damaged in any other way.
WARNING! Do not use circular saw blades.
Lock function.
Hot surface.
Throttle function, speed adjustment.
6
Note: Other symbols/decals on the product refer to
special certification requirements for certain markets.
The engine exhaust from this product
contains chemicals known to the State
of California to cause cancer , birth
defects or other reproductive harm.

Type plate

HUSQVARNA AB, HUSKVARNA, SWEDEN, MADE IN CHINA
HUSQVARNA MSXX
Serial No.
n XXXX/min Ø
0
A:Brand, type/model
B:Product number
C:Voltage
D:Serial No. with manufacturing date (YYYY, WW,
XXXXX): Year, Week, Sequence No
E:Nominal engine power, kW.
F:Rated spindle speed, RPM
G:Max cut-off wheel diameter
H:Rated current, Ampere (if applicable)
I:Input frequency

Product liability

It is the owner's/employer's responsibility that the
operator has sufficient knowledge about how to use the
A
XXX XX -XX XXV~
XXXXW
=XX"/XXXmm XXA XXHz
271 - 002 - 12.06.2018