Product Overview; Symbols On The Product - Husqvarna K 7000 Ring Manual Del Usuario

Product overview

1. Rear handle
2. Front handle
3. Control for the guide rollers
4. Grease nipples
5. Blade guard
6. Diamond blade (not supplied)
7. Adjuster screws
8. Screws for the support roller cover
9. Inspection covers
10. Display
11. Water tap
12. Power trigger lockout
13. Power trigger
14. Water connection, inlet
15. Locknuts for support roller arms
16. Spray guard
17. Belt guard
18. Rating plate
19. Power pack connection
20. Guide rollers
21. Support rollers
22. Drive wheel
23. Tool bag
24. Combination wrench
25. Hex key, 6 mm
26. Open wrench, 19 mm
1461 - 001 - 17.02.2020
27. Grease gun
28. Water connectors, Gardena
29. Bearing grease
30. Information and warning decal
31. Husqvarna high frequency power pack, (necessary,
not supplied)
32. Operator's manual

Symbols on the product

WARNING: This product can be dangerous
and cause serious injury or death to the
operator or others. Be careful and use the
product correctly.
Read the operator's manual carefully and
make sure that you understand the
instructions before you use this product.
Use approved protective helmet, hearing
protection, eye protection and respiratory
protection. Refer to
equipment on page 8 .
Dust forms when cutting. The dust can
cause injuries if inhaled. Use an approved
respiratory protection. Always provide for
good ventilation.
®
Personal protective
3