To Cut With Throttle (Ms 610 G); To Cut With The Cutting Arm Handle; To Cut With Plunge Cutting (Ms 610 G) - Husqvarna MS 610 G Manual Del Usuario

1. Turn the power switch (10) to the OFF position to
stop the machine.

To cut with throttle (MS 610 G)

1. Let the engine warm up for several minutes with
engine throttle at idle speed (minimum).
271 - 002 - 12.06.2018
10
2. Open the engine throttle full open.
3. Start sawing, all sawing is done at full throttle.

To cut with the cutting arm handle

1. Hold the handle and lower the blade to cut the work
piece.
2. Release the force from the handle to stop the
cutting.

To cut with plunge cutting (MS 610 G)

The cutting arm is spring loaded and adjustable up and
down.
17