Browse Between Menus - Husqvarna AUTOMOWER 105 Manual De Usuario

36.8 Submenus
There are a number of submenus under each
option. You can access all the functions to set the
product settings via the submenus.
Certain submenus contain options that are ticked
off to the left. This means that these options are
selected. Check or uncheck the box by pressing
the OK button.

36.9 Browse between menus

Browse through the main menu and submenus
with the help of the multichoice buttons
®
(Automower 105) or the arrow keys
®
(Automower 310/315/315X/420/430X/
440/450X). Enter values and times using the
number keys and confirm each selection with the
multi-choice button marked OK. Press BACK to
go up a step in the menu or keep the HOME
®
(Automower 105) alternatively MENU
®
(Automower 310/315/315X/420/430X/440/450X)
button pressed in for 2 seconds to go directly to
the main menu.
36.10 Main menu
Timer
The lawn should not be cut too often to
obtain the best mowing result.
Consequently, it is important to limit
the operating time using the timer
function if the work area is less than
the product's work capacity. The timer
function is also an ideal tool to control
which periods the product should not
mow, for example when children are
playing on the lawn.
Cutting height
Applicable for Automower
440/450X
The cutting height can be varied from
MIN (1) to MAX (9). During the first
week after a new installation, the
cutting height must be set to MAX to
avoid damaging the loop wire. After
this, the cutting height can be lowered
one step every week until the desired
cutting height has been reached.
98 - Installation
®
420/430X/
Security
In this menu, settings relating to
security and the connection between
the product and the charging station
can be made. There are 3 security
levels to choose from:
High .
Messages
Applicable for Automower
310/315/315X/420/430X/440/450X
Historical fault and information
messages can be read in this menu.
For some of the most common fault
messages, there are tips and advice to
help you rectify the fault.
Weather timer
Applicable for Automower
420/430X/440/450X
This function allows the product to
automatically adjust its mowing times
based on how much the lawn grows.
When the weather is good for grass
growth, the product mows more often
and when grass growth is low the
product automatically spends less time
on the lawn.
Installation
This menu function is used to
customize the installation. For many
work areas there is no need to alter the
factory settings, but depending on the
lawn complexity the mowing result can
be improved by making manual
settings.
Settings
This selection allows you to make
changes to the general product
settings such as date and time. You
ECO mode and
can also turn on/off
Spiral cutting , or save your settings in
Profiles (Automower
different
315/315X/420/430X/440/450X only).
903 - 001 - 21.09.2018
Low , Medium ,
®
®
315/315X/
®