The Indicator Lamp Automower; Browse Between Menus; Menu Structure - Husqvarna AUTOMOWER 105 Manual De Usuario

Ocultar thumbs Ver también para AUTOMOWER 105:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

The START button is used to activate the product.
This is normally the last button to be pushed
before closing the hatch.
The BACK and OK buttons are used to navigate in
the menu. The OK button is also used to confirm
settings.
The arrow button are used to navigate in the menu
but also to make selections in certain setting
options.
The MENU button is used to go to the main menu.
The PARK button is used to send the product to
the charging station.
The number buttons are used to enter settings, for
example PIN code, time or exit direction.

3.7 The indicator lamp Automower

305
The indicator lamp on the ON/OFF button is an
important status indicator:
The product is active if the indicator lamp lights
continuously.
The product is in power save mode if the indicator
lamp flashes. This means that the operator must
push the ON/OFF button to make the product
active again.
The product is disabled when the indicator lamp is
not lit.
WARNING:
inspection or maintenance on the product
when the product is disabled. The product is
disabled when the lamp on the ON/OFF
button is not lit.

3.8 Menu structure

The main menu for Automower
®
Automower
310 has 6 options and Automower
305/315/315X has 7 options. The main menu for
®
Automower
420/430X/440/450X offers 8 options.
14 - Installation
®
It is only safe to carry out
®
105 offers 4 options.
®
3.9 Submenus
There are a number of submenus under each option.
You can access all the functions to set the product
settings via the submenus.
Certain submenus contain options that are ticked off to
the left. This means that these options are selected.
Check or uncheck the box by pushing the OK button.

3.10 Browse between menus

Browse through the main menu and submenus with the
help of the multi-choice buttons (Automower
the arrow buttons (Automower
420/430X/440/450X). Enter values and times using the
number buttons and confirm each selection with the
multi-choice button marked OK. Push BACK to go up a
step in the menu or keep the HOME (Automower
alternatively MENU (Automower
420/430X/440/450X) button pushed in for 2 seconds to
go directly to the main menu.
3.11 Main menu
Schedule
Timer Applicable for Automower
The lawn should not be cut too often to
obtain the best mowing result.
Consequently, it is important to limit the
operating time using the this function if the
work area is less than the product's work
capacity. It is also an ideal tool to control
which periods the product should not
mow, for example when children are
playing on the lawn.
Cutting height
Applicable for Automower
440/450X
The cutting height can be varied from MIN
(1) to MAX (9). During the first week after
a new installation, the cutting height must
be set to MAX to avoid damaging the loop
wire. After this, the cutting height can be
lowered one step every week until the
desired cutting height has been reached.
Security
In this menu, settings relating to security
and the connection between the product
and the charging station can be made.
There are 3 security levels to choose
Low , Medium , High .
from:
®
105) or
®
305/310/315/315X/
®
105)
®
305/310/315/315X/
®
105
®
420/430X/
1418 - 007 - 17.09.2020

Publicidad

Tabla de contenido
loading

Tabla de contenido