Bosch TASSIMO VIVY TAS 12EU Serie Instrucciones De Uso página 13

Problem
The quality of the crema
has deteriorated.
Water is dripping from
the brewing unit.
Water is collecting on
the surface below the
cup stand.
The yellow Service
T DISC is damaged or
lost.
The beverage quantity
does not meet your
requirements.
TAS12xx_1Text_EU.indb 11
Cause
The beverage outlet is sticky
or dirty.
Build-up of limescale in the
appliance.
The T DISC is damaged or
leaky.
The T DISC has not been
pierced correctly.
The piercing unit has not
been inserted correctly.
This is condensation.
The T DISC bar code sends
volume information to the
appliance appropriate for
the beverage selected.
H owever, this information
can be individually adapted
to personal requirements.
Build-up of limescale in
the appliance could cause
reduced quantity.
Troubleshooting
Solution
Clean the beverage outlet. Please refer here
to the section e Cleaning.
Clean the brewing unit with the yellow
Service T DISC. Please refer here to the
section e Cleaning.
Descale the appliance. Please refer here to
the section f Descaling.
Do not use T DISCs that are damaged.
Only use each T DISC once.
Wait until the brewing stage has come to
an end and the appliance has cooled down.
Remove the T DISC and clean the b rewing
unit. Please refer here to the section
e Cleaning.
Press the piercing unit into its holder using
both thumbs (until an audible click is
heard).
Condensation may appear and is not
caused by any fault with the appliance.
Wipe the water away with a cloth.
The yellow Service T DISC can be
requested from Bosch Customer Services
(item no. 624088, contact information
included at the end of these instructions).
Reduced quantity:
During the brewing process, press the
Start / Stop button to interrupt this stage.
Increased quantity:
Press and hold the Start / Stop button until
the required beverage quantity has been
reached.
Descale the appliance. Please refer here to
the section f Descaling.
H
11 11 en
19.03.2013 14:52:24