No.
Malfunction
WINBOT Status Indicator Light
5
flashes BLUE after the robot is
placed on the glass.
Possible Causes
The Cleaning Pad is attached incorrectly and
is covering the Fan or the Edge Detection
Sensors.
Edge Detection Sensor malfunction.
Fan malfunction.
Glass is too dirty for WINBOT to adhere
properly.
6. Troubleshooting
Solutions
Remove the Cleaning Pad and re-attach it, making sure
it is placed exactly within its fastener area and does not
cover the Fan or the Edge Detection Sensors.
A. Remove the Cleaning Pad and re-attach it, making sure
it will not cover or affect the Edge Detection Sensors.
B. Clean the Edge Detection Sensors as described in
Section 4.2.
C. If the problem persists, please contact Customer
Service.
A. Clean the Fan as described in Section 4.2.
B. If the problem persists, please contact Customer
Service.
Clean a small area of the glass before using and placing
WINBOT there, or clean the window by hand first and use
WINBOT for regular cleaning after that.
* WINBOT is intended to be used for maintenance
cleaning on common windows. The product is not
designed to replace heavy-duty cleaners or for cleaning
windows with heavy dust for the first time.
29
EN