Whirlpool LWF7200 Manual De Instrucciones, Instalación Y Uso página 27

■Function has been entered
Three tones
■Invalid pad press
■Push to start reminder
Cycling tones
■End of cycle
Fahrenheit and Celsius
The temperature is preset at Fahrenheit, but can be changed to Celsius. To Change: Press and hold BROIL for 5seconds. A tone will
sound, and "C" will appear on the display. Repeat to change back to Fahrenheit. To exit mode, press OFF/CANCEL or wait 3 seconds.
Timer
The timer can be set in hours or minutes up to 12 hours and 59 minutes, and counts down the set time either in hours and minutes, or in
minutes and seconds. The timer does not start or stop the oven
.To Set:
1. Press TIMER SET/OFF. The timer indicator light will light up.
2. Press the TEMP/TIME "up" or "down" arrow pads to set the length of time.
3. Press START. When the set time ends, end-of-cycle tones will sound.
4. Press TIMER SET/OFF pad twice anytime to cancel the timer and reminder tones.
If Off/Cancel is pressed, the oven will turn off and the cook function will be disabled.
To display the time of day for 5 seconds when the timer is counting down, press CLOCK.
If Start is not pressed within 5 seconds after pressing TimerSet/Off or Temp/Time arrow pads, the "PSH" indicator light will flash and the
push to start tone will sound as a reminder. If no action is taken after 1minute, the display will return to the time of day or bake or broil
mode.
The timer can be reprogrammed to change the time while it is running.
To Reprogram:
1. Press TIMER SET/OFF.
2. Press the TEMP/TIME "up" or "down" arrow pads to adjust time.
3. Press START.
Control Lock
The Control Lock function blocks the control panel pads to avoid unintended use of cook functions. When the control is locked, only Clock,
Oven Light and Timer Set/Off will function. To Lock/Unlock Control: Before locking, make sure the cook functions are off. Press and hold
START for 3 seconds, and "Loc" will appear on the display. Repeat to unlock. "Loc" will disappear from the display.
Oven Temperature Control
IMPORTANT: Do not use a thermometer to measure oven temperature because opening the oven door may cause the
burner cycling to give incorrect readings.The oven provides accurate temperatures; however, it may cook faster or slower
than your previous oven, so the temperature calibration can be adjusted. It can be changed in Fahrenheit or Celsius.A minus
sign means the oven will be cooler by the displayed amount. The absence of a minus sign means the oven will be warmer by
the displayed amount. Use the following chart as a guide.
To Adjust Oven Temperature Calibration:
1. Press and hold BAKE for 5 seconds until the oven display shows the
current calibration, for example "00."
20°F (11°C)
2. Press the TEMP/TIME "up" or "down" arrow pad(s) to increase or to
decrease the temperature in 10°F (6°C) amounts. The adjustment can be
set between 30°F (17°C) and -30°F (-17°C).
3. Press START to save the adjustment, or press OFF/CANCEL to exit
without change.
Baking and Roasting
IMPORTANT: To avoid damage to the interior finish, do not place food or cookware on the oven door or oven bottom.
To Bake or Roast:
1. Press BAKE.
Press TEMP/TIME or TEMP/HOUR "up" or "down" arrow pads to set a temperature other than 350°F (175°C) in 5° amounts. The bake
range can be set between 170°F and 500°F (75°C and 260°C).
2. Press START or START/ENTER.
30
27
In some European factories the letter "W" of the part code mentioned herein will be automatically
09-May-2014 18:21:12 EDT | RELEASED
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")