Velleman VMM501 Manual Del Usuario página 26

You can find the
from
NeoPixel
3. Drag and drop the
(GRB format)
to 8 (we have 8 LEDs on the LED ring).
4. Now, drag and drop the
the
5. Complete the code according to the example.
6. When complete, we compile the programme and generate a hex. file. Click
on the download button and save the hex. file to the Downloads folder 
C:\downloads. This hex. file is ready to upload to the micro:bit.
Plug the micro:bit into a USB port. The, drag and drop the hex. file onto the
micro:bit removable device to upload the programme.
We can see rainbow rotating on the LED ring. Now, how would you make the ring blink like an eye?
Use this device with original accessories only. Velleman nv cannot be held responsible in the event of damage or
injury resulting from (incorrect) use of this device. For more info concerning this product and the latest version
of this manual, please visit our website www.velleman.eu. The information in this manual is subject to change
without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this manual may
be copied, reproduced, translated or reduced to any electronic medium or otherwise without the prior written consent of the
copyright holder.
V. 01 – 17/01/2019
NeoPixel at pin
1 to 360, item show
in the Code Drawer.
set strip to
block in the
set strip to
set strip to NeoPixel at pin
VMM501
P0 with 24 leds,
and items rotate pixels by
NeoPixel at pin P0
on start block. Set pin to P0 and the value 24
rainbow from 1 to 360
P0 block.
26
item show rainbow
1 blocks in
with 24 leds as RGB
block under
©Velleman nv