Sennheiser RS 120 II Guida Rapida página 6

mitter. The red LED lights up, indicating that the
batteries are being charged. The LED remains lit even
when the re-chargeable batteries are fully charged.
Using the RS headphone system
Switching on the audio source
4
Switch on the audio source. The transmitter
automatically switches on and off together with the
audio source. The
Switching on the headphones/adjusting the volume
5
First, set the volume on the headphones to a low level.
Switch on the headphones and set the volume to the
desired level.
Switch off the headphones after use to avoid
discharging the batteries.
Optimizing the reception
6
Adjust the receiver channel with the
the headphones.
However, if reception is subject to interference:
Change the transmission channel by setting the switch at
the bottom of the transmitter to another position and re-
adjust the receiver channel with the
headphones. Some electronic devices (e.g. televisi-ons)
can cause interference to your wireless headphone
system. If this happens, increase the distance between
the transmitter and the interference source.
Specifications and
Frequently Asked Questions (FAQ's)
Visit our website at www.sennheiser.com.
ON/OFF LED lights up green.
TUNE control on
TUNE control on the
3