Abicor Binzel TSi Instructivo De Servicio página 22

EN English Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes and amendments to these
operation instructions which may become necessary due to misprints, inaccuracies or improvements to the product. Such changes
will however be incorporated into subsequent editions of the Instructions. All trademarks mentioned in the operating instructions
are the property of their respective owners.
All brand names and trademarks that appear in this manual are the property of their respective owners/manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national subsidiaries and partners
worldwide can be found on our website at www.binzel-abicor.com
1 Identification
1.1 EU Declaration of Conformity
2 Safety
2.1 Designated use
2.2 Obligations of the operator
2.3 Personal protective equipment (PPE)
2.4 Classification of the warnings
2.5 Emergency information
3 Product description
3.1 Technical data
3.2 Abbreviations
3.3 Nameplate
3.4 Signs and symbols used
4 Scope of delivery
4.1 Transport
4.2 Storage
5 Functional description
6 Putting into operation
6.1 Mounting the device fastener
6.2 Setting up the TSi injection unit
6.3 Connect the compressed air line
6.3.1 Pneumatic plan
6.4 Manually set release agent
6.5 Programming the robot
EN - 2
EN-3 7 Operation
EN-3
8 Putting out of operation
EN-4
EN-4 9 Maintenance and cleaning
EN-4 9.1 Maintenance intervals
EN-4 9.2 De-dust and clean collection receptacle
EN-4 9.3 Clean the injection nozzle
EN-5 9.4 Replace rubber seal
EN-5 10 Troubleshooting
EN-5
EN-6 11 Disassembly
EN-7
EN-7 12 Disposal
12.1 Materials
EN-8 12.2 Consumables
EN-8 12.3 Packaging
EN-8
EN-8
EN-8
EN-9
EN-9
EN-10
EN-11
EN-11
EN-12
TSi injection unit
EN-13
EN-13
EN-14
EN-14
EN-15
EN-16
EN-17
EN-18
EN-19
EN-19
EN-19
EN-19
EN-19