Risk Of Injury; Programming The Robot - Abicor Binzel TSi Instructivo De Servicio

Ocultar thumbs Ver también para TSi:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

6 Putting into operation

Risk of injury

Injury to the eyes by sprayed release agent.
• When cleaning with compressed air, wear suitable protective clothing, in particular safety goggles.
1 Push the device cover (1) downwards and hold it down.
2 Set the required quantity of release agent by turning the screwdriver (3) to the left (+) or right (−).
NOTICE
• The injection impulse is executed by robot movement. The hold time of the robot in the lower position

6.5 Programming the robot

Carry out each step in accordance with the figures below:
P1
1
A
2
1
Robot
Fig. 9
Programming the robot
NOTICE
• P1 = approach position; P2 = injection position
• The maximum activation time for the injection impulse should be 2 to 3 seconds. Program the desired
• Avoid the formation of drops.
EN - 12
WARNING
determines the time for the injection impulse. The injection impulse should amount to a maximum of
2 to 3 seconds on the lower position.
8.4
impulse time depending on the injection results. The hold time of the robot in P2 determines the
injection time.
P2
B
2
TSi injection unit
TSi injection unit
2.4

Publicidad

Tabla de contenido
loading

Tabla de contenido