Replace Rubber Seal - Abicor Binzel TSi Instructivo De Servicio

TSi injection unit

9.4 Replace rubber seal

Carry out each step in accordance with the figures below:
1
A
C
B
1
Rubber seal
Fig. 11 Replace rubber seal
NOTICE
• The rubber seal to be used depends on the outer diameter of the gas nozzle. A deviation of ±1 mm in
1 Unscrew the device cover (2) using the bayonet closure and press out the rubber seal (1).
2 Replace the rubber seal (1) and press into the device cover (2).
3 Mount the device cover (2) using a bayonet closure.
D
2
Device cover
the outer diameter of the gas nozzle is permitted.
2
4
3
Sealing surfaces
9 Maintenance and cleaning
3
4
Bayonet closure
EN - 17