Clean The Injection Nozzle - Abicor Binzel TSi Instructivo De Servicio

9 Maintenance and cleaning

9.3 Clean the injection nozzle

 Fig. 10 Maintenance and cleaning on page EN-15
1 Unscrew the device cover (1) using the bayonet closure (2). Remove pressure flange (5) and collection
receptacle (4).
NOTICE
• Use an AF 14 spanner or the collection receptacle (4) to unscrew the injection nozzle (3).
Risk of injury
Serious injuries may be caused by parts swirling around.
• When cleaning with compressed air, wear suitable protective clothing, in particular safety goggles.
2 Unscrew the injection nozzle (3). Remove dirt and air-blast from both sides with compressed air.
3 Screw in the injection nozzle (3) again by hand and remount all parts in the reverse order.
EN - 16
WARNING
TSi injection unit