Peaq PDR180BT-B Manual De Instrucciones página 16

Size = A5
ENGLISH
Storing FM stations
You can store up to 30 preset FM stations.
1. Select the desired FM station.
2. Press and hold Preset until "Preset store" is
shown on display.
3. Turn the Tune dial to preset a number from
1 -30. Press Select to confirm the selection.
4. The preset number of the stored station is dis-
played.
Selecting a preset FM station
1. Press Mode to select FM stations.
2. Press Preset to access the Preset menu.
3. Turn the Tune dial to select a preset number
and confirm your selection by pressing Select.
Using the FM menu
1. Press and hold Menu button for 1 second in
FM mode and select a menu option by turning
the Tune dial:
• [Scan setting]
• [Audio setting]
• [System]
2. Confirm selection with Select.
Scan setting
1. Press and hold Menu button for 1 second in
FM mode and select [Scan setting] by turning
the Tune dial.
2. Press Select to confirm the selection.
• [Strong stations only]
Scans for stations with strong signals
• [All stations]
Scans all available stations
3. Select a menu option by turning the Tune dial
and confirm with Select.
Audio setting
Selecting mono or stereo mode.
1. Press and hold Menu button for 1 second in
FM mode and [Audio setting] by turning the
Tune dial.
2. Press Select to confirm selection.
3. Select a menu option with by turning the Tune
dial and confirm with Select.
• [Forced mono]
Selects mono playback
• [Stereo allowed]
Selects stereo playback
16
IM_PDR180BT-B_190617_V05_HR.indb 16
GENERAL SETTINGS
Press and hold Menu button for 1 second in any
mode and select [System] by turning the Tune dial.
Confirm selection with Select.
Following menu options are available:
1. Alarm
2. Time
3. Backlight
4. Language
5. Factory Reset
6. SW version
Setting the alarm time
Make sure the clock shows the correct time.
1. Turn the Tune dial and choose [Alarm] and con-
firm by pushing Select.
• [Alarm 1 Setup]
• [Alarm 2 Setup]
2. Press Select to access the Alarm Wizard.
3. Time of alarm: Set the hours and minutes with
the Tune dial and confirm with Select.
4. Set the alarm duration [Duration] with the Tune
dial and confirm with Select.
• [Duration 15]
The alarm sounds for 15 minutes.
• [Duration 30]
The alarm sounds for 30 minutes.
• [Duration 45]
The alarm sounds for 45 minutes.
• [Duration 60]
The alarm sounds for 60 minutes.
• [Duration 90]
The alarm sounds for 90 minutes.
5. Select the alarm tone [Source] with Tune dial
and confirm Select.
• [Buzzer]: Make the buzzer your alarm tone.
• [DAB]: Make the most recent DAB + station
played your alarm tone.
• [FM]: Make the most recent FM station
played your alarm tone.
17/6/2019 18:46