HQ-Power LEDC09 Manual Del Usuario página 4

 Keep this device away from dust and extreme temperatures. Make
sure the ventilation openings are clear at all times.
 Protect this device from shocks and abuse. Avoid brute force when
operating the device.
 Familiarise yourself with the functions of the device before actually
using it.
 All modifications of the device are forbidden for safety reasons.
Damage caused by user modifications to the device is not covered
by the warranty.
 Only use the device for its intended purpose. Using the device in
an unauthorised way will void the warranty.
 Damage caused by disregard of certain guidelines in this manual
is not covered by the warranty and the dealer will not accept
responsibility for any ensuing defects or problems.
 Keep this manual for future reference.
4. Installation
Refer to the illustrations on page 2-4 of this manual.
1 DIP switches
2 DMX input
3 DMX output
4 DMX input
5 DMX output
6 terminals
V–
V+
COM
CH1
CH2
CH3
CH4
Caution: Use either 8P8C connectors or 3-pin XLR connectors. Do
not use both.
V. 03 – 08/08/2017
LEDC09
to select the operating mode
8P8C (RJ45) input from external DMX
controller
8P8C (RJ45) output to next LEDC09 device in
daisy chain connection
3-pin XLR input from external DMX controller
3-pin XLR output to next LEDC09 device in
daisy chain connection
to 12-24 VDC power supply (–)
to 12-24 VDC power supply (+)
to LED strip, power
to LED strip, red (channel 1)
to LED strip, green (channel 2)
to LED strip, blue (channel 3)
to LED strip, white (channel 4)
4 ©Velleman nv