Hach LANGE WDMP sc Manual Del Usuario página 3

Table of contents
Specifications on page 3
General information on page 4
Installation on page 7
Startup on page 12
Specifications
Specifications are subject to change without notice.
Specification Details
Dimensions (W x D x H) 55.9 x 53.1 x 129.5 cm (22 x 21 x 51 in.)
Enclosure IP62
Weight 29.5 kg (65 lb)
Installation category II
Pollution degree 2
Altitude 2000 m maximum (6561 ft)
Protection I
Power requirements Line voltage—100 to 115 V/230 V, 50/60 Hz
Power consumption 90 VA maximum for CL17
24 W maximum for all other electronics
Fuse T, 2 A, 250 V (2x)
Digital output RS485 MODBUS
Humidity Maximum relative humidity 80% for
temperatures up to 31 °C (88 °F), decreasing
linearly to 50% relative humidity at 40 °C
(104 °F)
Operating temperature 5 to 40 °C (41 to 104 °F)
Maintenance on page 13
Troubleshooting on page 16
Parts and accessories on page 18
®
Specification Details
Storage temperature –20 to 60 °C (–4 to 140 °F)
Sample inlet ½-in. OD tube connection
Sample flow 0.4 to 0.6 L/min
Sample pressure 20 to 125 PSI
Sample temperature 5 to 40 °C (41 to 104 °F)
Sample waste drain ¾-in. ID hose barb connection
Sample waste drain pressure Ambient, free-flowing (atmospheric)
Individual instrument Specifications for individual instruments are
specifications presented in the manual supplied with the
instrument.
Wetted materials, CL17 Fittings—Acetal, polypropylene, PVC,
polycarbonate, Tefzel
Colorimeter—PVC, nitrile, glass
Tubing—Tygon R-3603, C-Flex
Wetted materials, 1720 E Body—Polystyrene
Bottom plate—Polycarbonate
Bottom plate filter glass—Acrylic
Photo diode arm—Brass, marine grade
Screw for the diode and drain plug—Stainless
steel
Diode window—Quartz glass
Sample and drain fittings—Polypropylene
Drain plug seal—Buna-N
Conductivity sensor Polypropylene, stainless steel, CPVC
pH controller and sensor Ryton, glass, Teflon, Viton, CPVC
® ®
, Santoprene , ABS
English 3