Symptoms
• Noise is generated.
• Tracks cannot play back as you have intended
them to play.
• "Now Reading..." keeps flashing on the
monitor.
• Correct characters are not displayed (e.g.
album name).
• While playing a track, sound is sometimes
interrupted.
Remedies/Causes
• The track played back is not a playable file format (MP3/
WMA/WAV/AAC). Skip to another file.
• Do not add the extension code <.mp3>, <.wma>,
<.wav>or <.m4a> to non-MP3/WMA/WAV/AAC
tracks.
Playback order may differ from the one played back using
other players.
• Readout time varies depending on the USB device.
• Do not use too many hierarchy, folders and empty
folders.*
* Folder that is physically empty or folder that contains
data but does not contain valid MP3/WMA/WAV/AAC
track.
• Turn off the power then on again.
• Do not pull out or connect the USB device repeatedly
while "Now Reading..." is displayed on the monitor.
For available characters, ☞ page 66.
The tracks have not been properly copied into the USB
device. Copy tracks again into the USB device, and try
again.
70