Accessories And Attachments - DeWalt D28490 Manual De Instrucciones

NOTE: Never depress the spindle lock button while the grinder is
running. Never turn on the grinder while the spindle lock button is
depressed. Damage to your tool may result.
MOUNT
The grinder is equipped with a mount, enabling easy wheel
installation and removal.

Accessories and Attachments

It is important to choose the correct guards, backing pads
and flanges to use with grinder accessories. See the chart on
pages 5–7 for information on choosing the correct accessories.
CAUTION: Accessories must be rated for at least the speed
recom mended on the tool warning label. Wheels and other
accessories running over rated speed can fly apart and cause
injury.
ATTACHMENTS
Attachments designed specifically for this grinder can be purchased
through D WALT dealers and D
E
D284939 9" Type 27 guard
D284948 9" Type 28 guard
D284937 7" Type 27 guard
D284936 6" Type 11 Flaring cup guard with flange
D284934 4" Type 11 Flaring cup guard with flange
D284933 Type 11 flaring cup wheel backing flange
D284932 Type 1 Flange set
D284931 7" Type 1 Guard
054339-00 Grinding backing flange
22191-00 Clamp nut
61820-01 Wheel Wrench
445928-01 Mount spindle protector
397711-00 Rubber gear case bumper
WALT Factory Service centers.
E
Sanding Flap Discs
mount
type 27 guard
D284937/D284939
hubbed sanding flap
disc
NOTE: Wheel size must match guard size; i.e., a new 7" wheel may
not be used with a 9" guard. The bottom surface of wheel must be
inside the bend of the guard lip.
5
mount
type 27 guard
D284937/D284939
backing flange
54339-00
non-hubbed sanding
flap disc
clamp nut
D22191-00