Sharp XE-A401 Manual De Instrucciones página 42

W
Toggles between single-size and double-size characters. By default, the single-size character is
selected. Once the
displayed when double-size characters entry is selected as shown in the operator display example
below.
B
Backs up the cursor, erasing the character to the left.
Operator display (Example)
To program the word "Clerk01" with the letter "C" being double size.
To make the letter "C" double size character
To make character size return to normal size
To toggle the characters to lower-case letters
To enter numbers
Entering character codes with numeric keys on the keyboard
Numerals, letters and symbols are programmable by entering the character code and the
characters entry is selected, "1" is displayed on the operator display (lower line). Press the
it.) Set the alphanumeric character code table on the next page. By doing this, you can program characters
other than those on the key tops.
• Double-size characters can be made by entering the character code 253 or pressing the
displayed when double-size characters entry is selected as shown in the operator display example below.
• All three digits of the character code MUST be entered (even if it starts with zero).
Operator display (Example)
Press of
:
253 065
Department code, PLU code, function number,
clerk code or logo message line number is displayed here.
Characters entered are displayed here.
To program the word "SHARP" in double-size characters
253
When you press an appropriate number key (job code number) and press the
start programming with the
40
W
key is pressed, you are locked in for entering double size characters. "W" is
Cursor
ABCD
01
Department code, PLU code, function number,
clerk code or logo message line number is displayed here.
Characters entered using character keys is displayed here.
Cursor
PGM
01 W 065
: :
083 072
S H
s
key, the cash register will automatically be ready for text entry.
PGM
Wa1 04
W g
W
H
h i j k
N 0 1
Characters: Indicating double size character of "A"
Press of
:
Character code
: : :
065 082
A R
Number of characters programmed
=C
01 W
=C
01
=C
01 a
=Clerk
01 a
=Clerk01
01 a1
:
=A
01 W
:
080
P
P
key for text entry just after you
PGM
02
PGM
02
PGM
02
PGM
06
PGM
08
key. (If numeric
N
key to release
W
key. "W" is
PGM
02
Number of characters
programmed