Corghi EM 7240 Manual De Uso página 58

CAUTION
Do not stack more than two packs to avoid damaging them.
After installation, the machine can be moved using the following methods:
- With a crane, using special equipment that holds the machine at the designated lifting
points (Fig. 2).
- Wy inserting the forks of a lift truck under the machine so that the centre of the forks
correspond approximately to the centre line of the body (Fig. 3).
WARNING
Always unplug the power supply cable from the socket before moving the machine.
CAUTION
Never apply force to the wheel spin shaft when moving the machine.
58
2
EM 7240 Operator's manual
3