Turbo Button; Light Button - Impecca ISAH-2418B1/I Manual De Usuario

REMARQUE: Les indicateurs «ON» et «OFF» peuvent être éclairés en même temps: l'appa-
reil se met automatiquement en marche et s'arrête selon les heures programmées.
X-FAN BUTTON
To avoid mold buildup, the X-Fan mode runs the interior and exterior unit fans to evap-
orate still water that remains in the air ducts. This mode is different than simply running
your indoor unit in Fan mode; in Fan mode only the indoor fan operates.
TEMPERATURE BUTTONS
Monitor the current indoor or outdoor temperature (select models only).
• Blank house icon: indicates the set temperature to be attained by the air conditioner unit.
• House with thermometer icon inside: displays the current interior ambient temperature
• House with thermometer icon outside: displays the current outdoor ambient temperature.
Note: select models do not feature outdoor temperature monitoring.

TURBO BUTTON

During cooling or heating modes, press the turbo button to enable quick heating or quick
cooling functions. Press the button again to disable turbo mode.
SLEEP BUTTON
During cooling, heating, or dehumidifier mode, press this button to enable the sleep func-
tion. Press the button again to disable the sleep mode.

LIGHT BUTTON

Press this button to turn on the display backlight on the indoor unit. Press the button
again to turn off the display backlight.
OTHER FUNCTIONS:
CHILD LOCK FUNCTION
Press and hold the + and - buttons simultaneously to enable child lock on the remote
control and prevent any operating mode modifications. Once locked, a padlock icon will
appear on the remote control display. If commands are entered while the remote control
is locked, the padlock icon will blink 3 times without sending the command signal to the
unit. Press and hold the + and - buttons again to disable the lock function.
–7–