RIB K800 PLUS Manual De Uso página 29

POINT A -
ELECTRIC CONNECTIONS
S3
J5
TR1
TR2
J4
SW S1
J3
J2
J1
J7 J6
J8
SW1
SW2
SW3
L1 - N 230Vac 50/60Hz POWER SUPPLY (120Vac/60Hz
J1
UPON REQUEST)
BLINKER (40 W MAX.)
U MOTOR COMMON CONNECTION
J2
V-W MOTOR PHASES AND CAPACITOR CONNECTIONS
PED. PEDESTRIAN OPENING CONTACT (NO)
J3
A+ TEST +24Vdc SAFETY STRIP SELF-TEST POWER
SUPPLY
LSC CLOSE LIMIT SWITCH THAT CUTS OFF THE
MOTOR IN CLOSING
COM LIMIT SWITCH COMMON CONTACT
LSO OPEN LIMIT SWITCH THAT CUTS OFF THE
MOTOR IN OPENING
STOP STOP CONTACT (NC)
J4
OPEN OPENING CONTACT (NC)
CLOSE CLOSING CONTACT (NC)
K. BUTT. SINGLE PULSE CONTACT (NO)
A+ ACCESSORIES POWER SUPPLY +24Vdc
A- ACCESSORIES POWER SUPPLY -24Vdc
SIGNAL GATE OPEN INDICATOR 24Vdc
COM COMMON CONTACT (common line for all the
command and safety inputs)
EDGE NC SAFETY STRIP CONTACT (NC)
AERIAL RADIO ANTENNA
J5
COM COMMON CONTACT (common line for all the
command and safety inputs)
PHOTO NC PHOTOCELLS CONTACT (NC)
PROBE TEMPERATURE SENSOR CABLE CONNECTION
J6
PROBE (Code ACG4665 optional)
ENCODER ENCODER CONNECTION (K PLUS operators)
J7
RADIO CONNECTOR FOR EXTERNAL RADIO RECEIVER
J8
24Vdc
PROG. PROGRAMMING BUTTON
S3
TR1 LOW SPEED ELECTRONIC REGULATOR FOR LOW SPEED ON
APPROACH
TR2 TORQUE ELECTRONIC TORQUE REGULATOR
SW S1 DO NOT REMOVE THE JUMPER!
SW S1
OTHERWISE THE OPERATOR WILL NOT WORK!
DIP-SWITCHES
SW1
SW2
SW3
NC: NORMALLY CLOSED CONTACT
NO: NORMALLY OPEN CONTACT
29
29
G
B