Leckey squiggles Instrucciones De Usuario página 21

8.5 Hip Support harness
The hip support should be attached around
the pelvic harness as an additional safety
support should the Velcro on the pelvic
harness begin to wear. It can be attached
by clipping the male buckle into the female
buckle at either end of the pelvic harness.
To adjust the tension lift the front panel,
adjust the straps to the required length and
then replace the panel.
8.6 Knee support pads
Attach the knee pads by clipping the male
buckle into the female buckle at either
side of the knee support, making sure
the opening of the front cover is facing
downwards as shown.