Annual Product Inspection - Leckey squiggles Instrucciones De Usuario

13 Annual Product
Inspection
(Therapist, Technician, VIDA Product
Specialist, Dealer)
Leckey recommend that each product
should be subject to a detailed inspection
at least once a year and every time the
product is reissued for use. This inspection
should be carried out by a technically
competent person who has been trained
in the use of the product and should
include the following checks as a minimum
requirement.
1. Check all knobs, nuts, bolts and plastic
buckles are in place, replacing any missing
items. Paying particular attention to the
following items;
> Headsupport locking bolts
> Chest and hip height and angle
adjustments
> Knee cups adjustment knobs and straps
> Footrest angle adjustment
2. Check the chassis folding and angle
adjustment mechanism is working properly.
Also, check that the locking pin on both the
Pivot Chassis and Easy chassis engages
securely in the pedal.
3. Lift the base to check each castor
individually. Make sure they are moving
freely and remove any dirt from the rubber
wheels. Check that the brakes lock the
wheels securely.
5. Visually check the structure of the
product paying attention to weld points on
the frame ensuring there are no signs of
fatigue or cracking around the welds.
6. Leckey recommend that a written
record is maintained of all annual product
inspections.
If in any doubt to the continued safe
use of your Leckey product or if any
parts should fail, please cease using the
product and contact our customer care
team or your local dealer as soon as
possible.