10.1 Transferring the user
into and out of
the stander
Before transferring the child into the
stander carry out the daily product
inspection as outlined in section 12 of this
user manual.
Before transferring the child into the
product lock all the castors, ensuring that
they are facing outwards to maximise
product stability. Make sure the straps on
the
chest, hip support harnesses and sandals
are released and out of the way to
facilitate transfer.
To facilitate transfer into supine standing,
angle the support frame to its most
horizontal position. This will enable easier
positioning of pads and straps while the
child is lying on their back.
Always secure the hip and chest support
harnesses first.
10.2 Chest and hip
support harness
To open the chest or hip support harness
unclip one buckle and move the harness to
one side leaving the other buckle attached.
Reverse the process when placing the user
back in the product.
Always secure the chest and hip support
harnesses first before making other
adjustments.
Always make sure the plastic buckles are
fully engaged.