Leckey squiggles Instrucciones De Usuario página 42

10.11 Pivot chassis angle
adjustment
The angle can be adjusted whilst the user
is in the stander. You should ensure the
child is secured in the stander using the
thoracic and hip pads. To adjust the angle
of the stander first release the locking pin.
To release the pin, pull and rotate plastic
knob (A) through 90 degrees into the locked
position.
Press the lever (B) down and set the
stander to the desired angle. Always re-lock
the locking pin (A).
Ensure that the product and user are
away from surrounding furnishings to
prevent possible collision when adjusting
the angle of the pivot chassis.
A
B
10.12 Easel Chassis
angle adjustment
To adjust the angle of the Easel Chassis
loosen the two plastic knobs (B). Press the
poppers and slide the outer tube to the
required angles and engage the poppers
(C) again. Finally retighten the plastic knobs
(B) securely.
Do not adjust the angle of the Easel
chassis with the child in the stander.
B
B
C
C