Invacare Aquatec Pure Bidet Manual Del Usuario página 20

Aquatec® Pure Bidet
1. If plugged-in, the device is turned on and the "POWER"
LED O illuminates on the control panel.
• If the "POWER" LED does not illuminate, press any
button on the remote control (except HIGH/LOW
or FRONT/BACK buttons).
2. Set yourself centered on the toilet seat.
3. Press the CLEANSING/MOVE button C or BIDET/MOVE
button D.
• CLEANSING respectively BIDET-function is
performed.
4. Press again CLEANSING/MOVE button or BIDET/MOVE
button during the cleansing process.
• The cleansing nozzle moves back and forth. Nozzle
stops by pressing the button again.
5. Press STOP button B on the remote control.
• Shower procedure stops.
6. Press DRY button E on the remote control.
• Warm air dryer is activated. Dryer function stops
by pressing the "STOP" button.
7. Press CLEANSING/STOP button K and hold for more
than 4 seconds.
• The device is turned off — All displays switch off
on the control panel.
20
CLEANSING/MOVE and BIDET/MOVE function
operates for 90 seconds. Hip bath function operates
for 3 minutes. DRY function operates for 3 minutes.
The functions are ending with an audible beep.
Before and after each operation, the self nozzle
cleaning function runs and sanitizes the nozzle head.
Perform automatic cleansing
The automatic cleansing function is a default function for
people with disabilities, children or the elderly, in which a
complete cleansing cycle is automatically executed.
1. Press AUTO button F on the remote control.
• The 3rd level for water pressure, the 2nd level for
warm air dryer temperature and the last setting of
nozzle position are automatically set-up.
• The Sensor forces to set the water- and seat
temperature to "Medium", in case the temperature
were set up on the "High" position.
• A buzzer sounds when the auto cleansing function
finishes.
2. Press STOP button B on the remote control.
• The automatic cleansing process is interrupted.
3. Press AUTO button F again.
• The previous automatic cleansing process is
resumed.
Automatic cleansing function: Move cleansing and
warm air dryer run for 1 minute each.
1590625-D