Sime HOME Manual De Instalacion Y Uso página 37

EN
m
WarnInG
When the submenu "boiler parameters" is selected,
the following screen appears when the the encoder
is pressed.
click
ENTER ACCESS CODE
Code: 0 0 0 0 0 0
Cancel
– Rotate the encoder to modify the first digit from 0 to 1
– press the encoder
click
select the next digit
– continue in this way until the code (or password) "1 2 3 4 5"
has been completed
ENTER ACCESS CODE
Code: 1 2 3 4 5 1
Cancel
– press the button
Confirm
area for the boiler
tings"
Boiler parameters
Parameter Index: 1
Parameter Value: 0
Esc
Confirm
to confirm the modification and
Confirm
to go into the "Parameter set-
1--------42
Back
– where "Parameter index" refers to the parameter table in the
manual of the installed boiler (eg. 1=ts 0.1 or 1=paR 01).
– Rotate the encoder
rameters and check the value
– if the value of the selected parameter is to be modified:
– press the encoder to go into the value modification
click
area
Boiler parameters
Parameter Index: 1
Parameter Value: 0
Esc
– press the encoder to set the new value
– press the encoder
click
move on to another parameter.
– once all the displays/modifications have been completed,
press the button
Esc
Zone 1
Winter manual - set 20.0°C
Menu
to scroll through the list of pa-
1--------42
Back
to confirm the modification and
to go back to the "main screen" .
Th 20 Mar 2014 10:30
Mode
37