Fault Warnings - Sime HOME Manual De Instalacion Y Uso

EN
– press the encoder
click
move to the next "data/value"
HOLIDAY SCHEDULE
DAY
Start: 05 02 2014 15 : 00 05
Stop: 20 02 2014 15 : 00
Enable holiday:
Hot water OFF - Heat. OFF (nofrost active)
Cancel
– Rotate the encoder
basis of the holiday start date
– press the encoder
click
move to the next "data/value"
– continue in this way until all the necessary modifications
have been made
the user must work in a ciRculaR manner ("rounda-
nb:
bout") therefore, alWays MoVinG FoRWaRds, even if a mis-
take has been made.
– When all modifications have been made, press the button
to go back to the item "holiday function"
Confirm
– press the button
Esc
Zone 1
Winter manual - set 20.0°C
Menu
to confirm the modification and
MONTH YEAR HOUR
NO
Confirm
to modify the "data/value" on the
to confirm the modification and
to go back to the "main screen" .
Th 20 Mar 2014 10:30
Mode
4.3.3

fault warnings

if a fault occurs, the screen "anomaly in progress" will appear
in place of the "main screen" . For the main fault codes, a brief
description will appear.
ANOMALY IN PROGRESS
2 - Low pressure
Esc Back
the fault maybe a transient (volatile) fault or a fault which
the appliance.
blocks
to restore normal operating conditions:
– if the fault is transient, eliminate the cause of the fault
– if the fault causes a block, eliminate the cause of the fault
and then press the button
if there is no water in the system or low water pressure in the
there will be a request to fill the system and then press
system
the button rather than
Confirm
ANOMALY IN PROGRESS
2 - Low pressure
Esc Charge
ANOMALY IN PROGRESS
6 - Burner block
Esc Reset
.
reset
.
reset
CONFIRM REQUEST
Confirm operation?
Cancel Confirm
43