JVC KD-X470BHS Manual De Instrucciones página 50

Installation/Connection
Connect external components
No Part
1 For KD-X470BHS: MIC (Microphone input terminal) (page 20)
2
For KD-X370BTS/KD-X37MBS: MIC (Microphone input terminal) (page 20)
3 Output terminals (See "Connect external amplifiers via output terminals".)
4
For KD-X470BHS/KD-X370BTS/KD-X37MBS:
Expansion port (12 V 500 mA): To the optional SiriusXM Vehicle Tuner (commercially
available). (Page 16)
5 For KD-X270BT/KD-SX26BT: Microphone input jack (page 20)
46
ENGLISH
Connect external amplifiers via output terminals
Signal cord (not supplied)
Output terminals
* Firmly connect the ground wire of the amplifier to the car's chassis to avoid damaging the unit.
Model Output terminals
KD-X470BHS/ REAR:
KD-X370BTS/
FRONT:
KD-X37MBS/
SW:
KD-X270BT/ REAR/SW:
KD-SX26BT
JVC Amplifier*
Remote wire (not supplied)
To remote lead (blue/white) of the
wiring harness. (Page 45)
2-way crossover 3-way crossover
Rear output Tweeter output
Front output Mid Range output
Subwoofer output Woofer output
Rear/subwoofer output Woofer output