Teac PD-H300mkIII Manual Del Usuario página 7

A STANDBY/ON
Press this button to turn the unit on or standby.
The standby indicator surrounding the STANDBY/ON button
lights when the unit is in the standby mode. When the unit is
turned on, it goes off.
The equipment draws nominal non-operating power from
the AC outlet with its STANDBY/ON switch in the STANDBY
position.
B
Disc tray
C OPEN/CLOSE
Use this button to open and close the disc tray.
D REPEAT 1/ALL
Use this button to select the repeat mode.
E PLAY (y)
Use this button to start playback.
F PAUSE (J)
Use this button to pause playback.
G STOP (H)
Use this button to stop playback.
H SKIP/SCAN
Use these buttons to skip or search tracks.
I Remote Sensor
When operating the remote control unit, point it towards the
remote sensor.
J
Display
K Numeric buttons
Use these buttons to select a track number.
For instance, to select track number 35, press '3' and '5'.
L
A-B
Use this button to set the point for A-B repeat.
M
FOLDER (b,5)
Use these buttons to select a folder of MP3/WMA.
N
SCAN (m/,)
During playback, use these buttons to search the part you
want to listen to.
O
SHUFFLE
Use this button for shuffle playback.
P
CLEAR
Use this button to clear a program.
Q
PROGRAM
Use this button to enter the program mode. In program
mode, use this button to enter the selection.
R
ENTER
Use this button to enter the selection.
S
DISPLAY
During MP3/WMA playback, use this button to change what
information is displayed.
T TIME
During playback, use this button to change the time display.
U FILE (b,5)
Use these buttons to select a file of MP3/WMA.
V SKIP (.//)
Use these buttons to skip tracks/files.
Note:
To simplify explanations, instructions in this manual refer to
the names of the buttons and controls on the front panel
only. Associated controls on the remote control will also
operate similarly.
7