Teac PD-H300mkIII Manual Del Usuario página 9

A To stop playback
Press the STOP button (H) to stop playback.
B To suspend playback temporarily (pause mode)
Press the PAUSE button (J) during playback. Playback stops
at the current position, and J is displayed.
To resume playback, press the PLAY button (G) or PAUSE
button (J).
C To skip to the next or a previous track/file
During playback, repeatedly press the SKIP button
(.or/) until the desired track/file is found. The selected
track/file will be played from the beginning.
In the stop or pause mode, press the SKIP button
(.or/) repeatedly until the track you want to listen to is
found. Press the PLAY button to start playback from the
selected track.
< When the . button is pressed during playback, the track
being played will be played from the beginning. To return to
the beginning of the previous track, press the . button
twice.
< During programmed playback, the next or previous track in
the program is played.
D C B
A
D Search for a part of a track/file
During playback, hold down the .m or ,/ button
and release it when the part you want to listen to is found.
On the remote control use them or , button.
E Direct Playback
While in stop or playback mode, you can use the numeric
buttons of the remote control to select a track/file.
Press the numeric buttons to select a track/file. Playback starts
from the selected track/file.
For instance, to select track number 35, press "3" and "5".
To select a MP3 or WMA file, enter 3 digit numbers. As an
example, to select number 5, press "0", "0" and "5".
(Optionally, you may press just the number "5" and then wait
a few seconds.)
9