ENERGY SAVER (STANDBY MODE)
This machine has a special feature called Energy Saver™ mode. This mode is NOT automatically activated for EX-79
models, but it IS activated for EX-69 models. When Energy Saver mode is activated, the display will automatically enter
standby mode (Energy Saver mode) after 15 minutes of inactivity. This feature saves energy by disabling most power to
the machine until a key is pressed on the console. This feature can be turned on or off in the engineering menu.
To enter the engineering menu, press and hold the both resistance Up and Down keys for 3-5 seconds. Use the up/
down keys to navigate through the menu to ENG2. Press ENTER to select. Use up/down keys to select ENRGY SVE
ON or OFF. Press and hold STOP for 3-5 seconds to exit ENG2. Press and hold STOP again for 3-5 seconds to exit the
engineering menu.
33