Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
For wall surface measurements, press the function-mode button 8 until the
indicator for wall surface measurement
the centre measured-value line a. The laser remains switched on.
In this manner, you can measure any number of further lengths B
are automatically added and multiplied with height A.
The condition for a correct area/surface calculation is that the first measured
length (in the example the room height A) is identical for all partial surfaces.
After pressing the angle measurement button 3, the indication for angle
measurement appears
tool is used as the measurement reference. By pressing the angle
measurement button 3 again, the side surfaces of the measuring tool are
used as measurement reference and the display view is shown turned by
90°.
Press the measuring button 2 to lock the measuring value and accept it
in the measured values memory. Pressing the measuring button 2 again
continues the measurement.
When the indication flashes during the measuring procedure, then the
measuring tool was tilted too much in lateral direction.
If the "digital vial" function is activated in the basic settings, the angle value
is also displayed in the other measuring functions in line d of display 1.
Measure the room height A as for a length measurement.
The measured value ("cst") is displayed in the top
measured-value line a. The laser remains switched on.
Afterwards, measure length B
surface is automatically calculated and displayed in the
result line c. The length measurement value is displayed in
1
Now, measure length B
individually measured value displayed in the centre
measured-value line a is added to the length B
sum of both lengths ("sum", displayed in the bottom
1
2
measured-value line a) is multiplied with the stored height
A. The total surface value is displayed in the result line c.
1
Angle measurement (see figure G)
on the display . The rear edge of the measuring
1
appears on the display.
1
of the second wall. The
2
-29-
of the first wall. The
x
. The
1
, which
Publicidad
Tabla de contenido
