GENERGY ROBUSTA Serie Instrucciones De Uso página 51

3 Place the engine's ignition switch to "ON"
IGNITION SWITCH
4 Pull the startup handle slowly and until the end to calculate the maximum length
of the rope (and do not exceed it later when pulling vigorously), then allow the rope
to coil back.
Pull softly again until you notice slight resistance, now allow the rope to coil back
and pull vigorously to start up the engine.
If you were unable to start up in the first try, repeat the operation.
NOTE: If you reach the end of the rope length abruptly you could damage the
handle or rope spring and it wouldn't be covered by warranty.
NOTE: Do not let go of the handle after pulling to prevent the handle from
hitting the machine. Move your hand along with the handle until it has coiled back
completely.
NOTE: Never pull the rope again if the generator is already running and
turning.
STARTUP HANDLE
15