5.
HAMMAM KEY
Steam is now being generated and you can control the temperature in the Turkish Bath on the panel, as well
as enable the light and chromotherapy.
To switch off the steam generator press the HAMMAM key again. After a few seconds the generator will start
the boiler washing procedure, which lasts 15 minutes. Do not interrupt the electricity supply.
6.
WARM KEY
The WARM function allows you to pre-heat the hammam room by means of hot air (the key is active only if a
Power Steam is installed).
Pressing the WARM key activates the POWER STEAM function and the dry heating of the room has now
started.
You can adjust the temperature in the room and enable/disable the light and chromo therapy on the panel.
Manuale d'uso GV Nuvola TOUCH
UK
25 di 88