Android Auto; Using Android Auto - Pioneer DMH-ZS8250BT Manual De Instrucciones

Android Auto™

You can operate Android applications with finger gestures such as tapping, dragging,
scrolling, or flicking on the screen of this product.
Compatible Android devices
For details about compatibility of Android models, refer to the following website.
https://support.google.com/androidauto
NOTES
• [USB MTP] is set to [Off] to use Android Auto (page 32).
• The compatible finger gestures vary depending on the application for the smartphone.
WARNING
Certain uses of the smartphone may not be legal while driving in your jurisdiction, so you must be
aware of and obey any such restrictions. If in doubt as to a particular function, only perform it while the
car is parked. No feature should be used unless it is safe to do so under the driving conditions you are
experiencing.

Using Android Auto

Important
Android Auto may not be available in your country or region.
For details about Android Auto, please refer to the Google™ support site:
http://support.google.com/androidauto
• The content and functionality of the supported applications are the responsibility of the App
providers.
• In Android Auto, usage is limited while driving, with availability of functions and content determined
by the App providers.
• Android Auto allows access to applications other than those listed that are subject to limitations
while driving.
• PIONEER IS NOT RESPONSIBLE AND DISCLAIMS LIABILITY FOR THIRD PARTY (NON-PIONEER) APPS
AND CONTENT, INCLUDING WITHOUT LIMITATION ANY INACCURACIES OR INCOMPLETE
INFORMATION.
Setting the driving position
To achieve optimum usability of Android Auto, set the driving position setting correctly
according to the vehicle. The setting will be applied the next time an Android Auto
compatible device is connected to this product.
1
Touch .
2
Touch then .
The system setting screen appears.
26
En
3
Touch [Driving Position].
4
Touch the item.
[Left]
Select for a left-hand drive vehicle.
[Right]
Select for a right-hand drive vehicle.
Starting procedure
1
Connect an Android Auto™ compatible device to this product via USB.
2
Touch .
3
Touch .
4
Touch [Android Auto].
5
Touch Android Auto icon in the tab.
The application screen appears.
TIP
You can use voice recognition function by touching
NOTES
• For details on USB connection, refer to Smartphone (Android device) (page 43).
• When the device for Android Auto is connected to this unit, the device is also connected via
Bluetooth at the same time. If five devices are already paired, the message confirming whether to
delete the registered device is displayed. If you want to delete the device, touch [Agree]. If you want
to delete other device, touch [BT Settings] and delete the devices manually (page 10).
• If Android Auto is turned on during a call on a mobile phone other than the Android Auto compatible
device, the Bluetooth connection will switch to the Android Auto compatible device after the call.
Adjusting the volume
You can adjust the guidance volume separately from the main sound volume when
Android Auto is used.
1
While Android Auto is activated, touch VOL (+/-).
The volume menu will be displayed on the screen.
button once Android Auto is activated.