NOTE
[Subwoofer Settings] is available only when [Subwoofer] is [On].
1
Touch
.
2
Touch
then
.
3
Touch [Crossover] or [Subwoofer Settings].
4
Touch
or
to switch the speaker.
5
Drag the graph line to set the cutoff position.
6
Drag the lowest point of the graph to set the cutoff slope.
The following items can also be set.
Switches the subwoofer phase between normal and reverse position.
Switches the LPF/HPF setting to [On] or [Off]. When it is turned off, the high-pass
LPF/HPF
filter or low-pass filter of each speaker can also be turned on by touching the
graph lines.
Video settings
The menu items vary according to the source.
[Time Per Photo Slide]
Menu Item
Description
[Time Per Photo Slide]
Select the interval of image file slideshows on this product.
[5sec] [10sec] [15sec]
[Manual]
[Video Signal Setting]
Menu Item
Description
[AV]
Select the suitable video signal setting when you connect
[Auto] [PAL] [NTSC] [PAL-
this product to an AV equipment.
M] [PAL-N] [SECAM]
[AUX]
Select the suitable video signal setting when you connect
[Auto] [PAL] [NTSC] [PAL-
this product to an AUX equipment.
M] [PAL-N] [SECAM]
[Camera]
Select the suitable video signal setting when you connect
[Auto] [PAL] [NTSC] [PAL-
this product to a rear view camera.
M] [PAL-N] [SECAM]
Favourite menu
Registering your favourite menu items in shortcuts allows you to quickly jump to the
registered menu screen by a simple touch on the [Favourites] screen.
NOTE
Up to 12 menu items can be registered in the favourite menu.
Creating a shortcut
1
Touch
then touch
.
2
Touch the star icon of the menu item.
The star icon for the selected menu is filled in.
TIP
To cancel the registration, touch the star icon in the menu column again.
Selecting a shortcut
1
Touch
then touch
.
2
Touch
.
3
Touch the menu item.
Removing a shortcut
1
Touch
then touch
.
2
Touch
.
3
Touch and hold the favourite menu column.
The selected menu item is removed from the [Favourites] screen.
TIP
You can also remove a shortcut by touching and holding the registered menu column.
39
En