Noise Conditions; Removal Of Package - Fox F28-186A Manual De Instrucciones

The noise emitted, measured in conformity with the standards EN 3744 and EN 11201 is:
- Sound pressure level
- Sound power level
- Uncertainty of measurement K = 3 dB
We recommend you to use ear protection devices.
The sources of the noise of the saw are: the electric engine and its ventilation system, the
blade and the material to be cut.
We advise you to control the engine, its ventilation system and the aspiration passages. As far
as the saw blade is concerned, it is preferable to use silenced type of blades and to keep them
in good conditions. We recommend to use the correct saw blade and to keep firmly the
workpiece to be cut.
Noise levels are emission levels and do not necessarily indicate safe working conditions. Even
if there is a connection between emission levels and exposure levels, the first ones cannot be
used to determine safely if other precautions are necessary. The factors that can influence the
actual exposure level of the operator include exposure length, environment features and other
sources of noise, as for example the number of machines and operations present. Besides,
exposure levels can change from country to country. However, these instructions enable the
user of the machine to better evaluate the dangers and risks.
Your bandsaw is delivered complete in a package. Remove carefully the table saw and all the
parts from the packaging, check if there are any missing or damaged parts.
If you find any faulty or damaged parts do not use them in order not to endanger the efficiency
and the safety of the machine. To change faulty parts consult an after sales centre.
To make the table saw perfectly work you must assemble the various parts, for which you can
find a detailed explanation later on.
We recommend you to read carefully the assembly instructions and to follow them to the letter.
The following photo illustrates the bandsaw and all the parts included in the packaging.
List of parts included in the package:
- One bandsaw complete with blade (assembled)
- One workbench
- One sliding rail for the rip fence
- One rip fence
- One coupling for a dust collection device
- One pusher
- 4 legs
- 8 bars
- Various nuts and bolts

NOISE CONDITIONS

L
pA = 92,7 dB(A) with load
L
WA = 102,3dB(A) with load

REMOVAL OF PACKAGE

30