Connection Of The Dust Collection Device; Protection Of The Blade; Upper Protection Of The Saw Blade; Lower Protection Of The Saw Blade - Fox F28-186A Manual De Instrucciones

The rip fence can be assembled on the left and on the right of the saw blade. You can lock
the guide by lowering the lever (A).
V.

Connection of the dust collection device

DANGER!
The dust of certain kind of wood, as for example oak, beech or ash-tree has been
proved to be especially dangerous for human health. We recommend you to work
outdoors, to use an efficient dust collection device and personal safety devices as for
example dust masks.
In the bandasaw there is a coupling to which you can connect the pipe of an external dust
collector to extract the dust and wood shavings.
We recommend you to always connect a dust collector when processing wood and to use a
dust mask.
If you do not have a dust collector, we recommend you to work outdoods, with a dust mask
and for short periods of time.
You must periodically remove wood shavings piling up inside the bandsaw and in the
pulley's compartments.
I. Upper protection of the saw blade FIG.6
The upper protection of the saw blade (20), which is an integral part of the group including
also the upper blade guide, prevents any unintentional contact with the blade and protects
you the ejection of the shavings. You must always place the upper protection of the blade
about 3 mm far from the workpiece in order to ensure the maximum safety degree.
Upper blade guide's height (48) 1 must be adjusted:
- before any cutting, in order that it is adjusted according to workpiece's height;
- after any modification of the saw blade or of the workbench (for example, after
changing or tensioning the saw blade, or after adjusting the workbench).
The upper blade guide with its protection (48) is locking of a knob (49). To adjust the height
of this blade guide, grip the blade guide with the left hand, unlocking knob (49) to adjust the
height of the upper blade guide in the desired position.Locking knob (49).
II. Saw blade's lower protection FIG.6
Saw blade's lower protection (21) prevents from any unintentional contacts with the blade.
This protection must be moved when you open the lower door. When you close this door
this protection must be replaced in its position to not to compromise general safety. Saw
blade's lower protection must be always assembled when you are using the machine.
III. Flywheels' doors FIG.6

PROTECTION OF THE BLADE

33